surface mount high efficiency rectifier voltage range 50 to 600 volts current 0.5 ampere maximum ratings and electrical characteristics ratings at 25 o c ambient temperature unless otherwise specified. single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20%. 05h1thru 05h6 sod-123f maximum ratings (@ t a =25 o c unless otherwise noted) dimensions in inches and (millimeters) .150 (3.8).142 (3.6) .035 (0.90).028 (0.70) .053 (1.35).047 (1.20) .077 (1.95) .069 (1.75) .030 (0.75).022 (0.55) .008 (0.20) .114 (2.9).106 (2.7) features * low power loss, high efficiency * low leakage * low forward voltage * high current capability * high speed switching * high surge capability * high reliability mechanical data * epoxy: device has ul flammability classification 94v-o * mounting position: any * weight: 0.016 gram ratings maximum recurrent peak reverse voltage maximum rms voltage maximum dc blocking voltage maximum average forward rectified current at t a = 55 o c peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (jedec method) typical junction capacitance (note 2) typical thermal resistance (note 4) operating and storage temperature range symbol v rrm v dc i o i fsm c j t j , t stg v rms amps 0.5 15 130 30 15 r q ja r q jl -55 to + 150 amps pf 0 c 0 c/w units 5035 50 100 70 100 voltsvolts volts 12 200140 200 600420 600 400280 400 300 210300 05h1 05h2 05h3 05h4 05H5 05h6 electrical characteristics (at t a = 25 o c unless otherwise noted) notes : 1. test conditions: i f = 0.5a, i r = -1.0a, i rr = -0.25a 2. measured at 1 mh 4. thermal resistance : mounted on pcb. z and applied reverse voltage of 4.0 volts 2006-11 50 at rated dc blocking voltage t a = 25 o c characteristics maximum full load reverse current average, full cycle .375 (9.5mm) lead length at t l = 55 o c maximum reverse recovery time (note 1) v f symbol i r trr 5.0 100 75 uamps uamps nsec maximum dc reverse current maximum instantaneous forward voltage at 0.5a dc volts units 1.0 1.7 1.3 05h1 05h2 05h3 05h4 05H5 05h6 3. fully rohs compliant, 100% sn plating (pb-free). downloaded from: http:///
ambient temperature, ( o c) instantaneous reverse current, ( m a) 25 1.0 0 0 0.5 75 50 175 100 125 150 rating and characteristics curves ( 05h1 thru 05h6 ) f i g . 2 t y p i c a l f o r w a r d c u r r e n t d e r a t i n g c u r v e f i g . 1 t e s t c i r c u i t d i a g r a m a n d r e v e r s e r e c o v e r y t i m e c h a r a c t e r i s t i c percent of rated peak reverse voltage, (%) average forward current, (a) 0 0.01 1.00.1 100 10 60 20 40 80 100 120 140 f i g . 3 t y p i c a l r e v e r s e c h a r a c t e r i s t i c s trr +0.5a 50 wnoninductive 10 wnoninductive 0 -0.25a -1.0a 1cm set time base for 50/100 ns/cm notes: 1 rise time = 7ns max. input impedance = 1 megohm. 22pf. 2. rise time = 10ns max. source impedance = 50 ohms. d.u.t 25 vdc(approx) ( - ) ( - ) ( + ) ( + ) 1non- inductive oscilloscope (note 1) pulse generator (note 2) single phasehalf wave 60hz resistive or inductive load t a = 25 o c t a = 100 o c t a = 50 o c downloaded from: http:///
number of cycles at 60hz peak forward surge current, (a) instantaneous forward voltage, (v) 1 0 12 96 3 15 18 21 instantaneous forward current, (a) 0.1 0.01 0.001 1.0 10 10 20 5 2 50 100 1.4 1.2 1.0 0.8 0.6 0.4 0 0.2 1.6 1.8 rating and characteristics curves ( 05h1 thru 05h6 ) f i g . 4 t y p i c a l i n s t a n t a n e o u s f o r w a r d c h a r a c t e r i s t i c s f i g . 5 m a x i m u m n o n - r e p e t i t i v e f o r w a r d s u r g e c u r r e n t reverse voltage, (v) junction capacitance, (pf) 4 6 40 20 10 60 200 100 0.2 0.1 21 0.4 2 1.0 4 10 20 40 100 f i g . 6 t y p i c a l j u n c t i o n c a p a c i t a n c e pulse width=300ms 1% duty cycle t j = 25 o c 50/100/200v 300/400v 600v 8.3ms single half sine-wave (jeded method) t j = 25 o c 05h1~ 05H5 05h6 downloaded from: http:///
mounting pad layout dimensions in inches and (millimeters) 0.035min. (0.90 min.) 0.165 0.030 min. (0.75 min.) ( 4.19) ref downloaded from: http:///
rectron inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifi cations, enhancements or other changes. rectron inc or anyone on its behalf assumes no responsibility or liabi- lity for any errors or inaccuracies. data sheet spe cifications and its information contained are intended to provide a product description only. "typical" paramet- ers which may be included on rectron data she ets and/ or specifications ca- n and do vary in different applications and actual performance may vary over ti- me. rectron inc does not assume any liability arising out of the application or use of any product or circuit. rectron products are not designed, intend ed or authorized for use in medical, life-saving implant or other applications int ended for life-sustaining or other rela- ted applications where a failure or malfunct ion of component or circuitry may di- rectly or indirectly cause injury or threaten a li fe without expressed written appr- oval of rectron inc. customers using or selling rectron components for use in such applications do so at their own risk and shall agree to fully indemnify rect- ron inc and its subsidiaries harmless against all claims, damages and expendit- ures. disclaimer notice downloaded from: http:///
|
